630 Cantilever Single Twist Machine For Data Cable Bunch Conductor
1. Application
This machine applies to bunch conductor for Earphone
wire,Electronic wire,Telephone wire,Automotive wire,Medical
instrument,Aerosapace etc.
Suitable conductor:above senven pcs of alloy wires,tinned
wires,silver jacketed wire,enamelled wire and other super fine
conductors.
2. Performance and feature
This series of equipments consists of PLC proedure, frequency
conversion speed-regulation control, pneumatic control. Cantilever
cabling twist motion, bobbin capston take-up motion and bobbin
reciprocating traverse motion are dual controlled by mechanical
linkage and pneumatic linkage, thus, the excellent synchronous
performance of the unit from starting normal operation, slow stop
and emergency stop status, in addition, the stable twist pitch is
also ensure with small errors at the same time.
3. Technical parameters
Model
| 400-500 | 630 | 800 | 1000 | 1250 |
Pay-off bobbin(mm)
| 300-400mm | 400-500-630 | 400-500-630 | 400-500-630 | 400-500-630 |
take-up bobbin(mm)
| 500 | 630 | 800 | 1000 | 1250 |
Wire diameter(mm)
| 0.5- 2.0 (Soft structure) | 0.6- 3.0(Soft structure) | 0.6-3.0(Soft structure) | 1.0-5.0 (Soft structure) | 1.0-5.0 (Soft structure) |
Max twist diameter(mm)
| Φ6 | Φ15 | Φ20 | Φ25 | Φ30 |
Lay length(mm)
| 13-80 | 20-200 | 30-300 | 30-350 | 30-350 |
Rotate speed(RPM)
| 850 | 1000 | 800 | 800 | 500 |
Take-up tension
| Auto tension,adjust freely |
Traverse method
| According to bobbin speed reciprocating movement to adjust |
Traverse pitch(mm)
| 2.5-10 | 2-12 | 3-20 | 3-30 | 3-30 |
4. Photo
5. Packing photo
6. Our factory and introduction
Hejian Baohong Electrical Machinery Co., Ltd. was established in
2006. Our company is located in the Economic Development Zone of
Hejian City, Hebei Province, has been the largest professional
manufacturer for wire stranding machine and laying-up machine in
North China.
Since 2006, relying on the care and support of our customers,
Baohong Machinery has been devoted to the research and development
of wire stranding machine and laying-up machine and has made great
improvement. Now we have become the only one factory who can
develop the production of the JLK rigid stranding machine series to
be an assembly line processing in China, and we also have
independently developed the JGB Bow skip stranding lines, the CGB
Bow skip type cabling lines and the CLY High speed Cradle type
Laying-up lines.
Now, Hejian Baohong Electrical Machinery Co., Ltd., covers an area
of 10000 square meters, production workshop 8000 square meters. Our
company has 60 employees, including 10 R & D staffs. Annual output
value is over 10 million dollars at present,and has developed into
one of the most important Stranding Machine Manufacturer in China.
