ACSR Copper Cable Armouring Machine Sun Type 75kw
1. Application
The machine is mainly used for the production of steel cored
aluminum strand wire, stranding and pressing of sector conductor,
stranding and drawing and pressing of round conductor,and steel
wire armoring.The machine adopts independent motor linkage to
ensure the accuracy and stability of stranding pitch. The strander
adopts frame structure to improve the rigidity of the structure, so
it can rotate at high speed and improve the production efficiency.
2. Main Component
2.1 Φ1600 Pay-off stand 1set
2.2 12B ,18B,24B Rigid strander 1set each
2.3 Intelligent meter counter 1set
2.4 Φ 2000 strong double capstan 1set
2.5 Φ 2500 Column type take-up stand with traverse 1set
2.6 Electric control system 1set
2.7 Wall type safety fence 3sets
2.8 Steel wire armored head + inner tube 1set
3. Features
3.1 Central shaft does not bear the reels .
3.2 High rigid, high speed and low inertia high speed and low
inertia.
3.3 No abrasion damage when stranding.
3.4 Most advanced emergency stop device.
3.5 Suitable for power cables and high compacted cross linking
cables.
3.6 PLC control system, operating on touch screen.
4. Technical parameters
Model (Steel Wire Armoring Machine) | JLY-315 | JLY-400 | JLY-500 | JLY-630 |
| Steel wire diameter | 1-2 .5 mm | 1-2 .5 mm | 1-2 .5 mm | 1-2 .5 mm |
| Maximum stranded OD | 40 mm | 55 mm | 60 mm | 70 mm |
| Stranding Pitch |
24 Bobbin Stranding Cage | 38-752 | 51-942 | 63- 1144 | 500-4120 |
36 Bobbin Stranding Cage | 38-752 | 51-942 | 63- 1144 | 500-4120 |
42 Bobbin Stranding Cage | 38-752 | 51-942 | 63- 1144 | 500-4120 |
| 48 Bobbin Stranding Cage | 38-752 | 51-942 | 63- 1144 | 500-4120 |
| Rotating Speed | 24 Bobbin Stranding Cage | 98 r/min | 90 r/min | 68 .3 r/min | 55 r/min |
| 36 Bobbin Stranding Cage | 88 r/min | 80 r/min | 58 .3 r/min | 45 r/min |
| 42 Bobbin Stranding Cage | 78 r/min | 70 r/min | 48 .3 r/min | 35 r/min |
| 48 Bobbin Stranding Cage | 68 r/min | 60 r/min | 38 .3 r/min | 28 r/min |
Capstan | Capstan Wheel Diameter | 1600 mm | 2000 mm | 2000 mm | 2500 mm |
| Maximum Haul-off Force | 10T | 15T | 15T | 20T |
Motor Power | 45 KW | 55 KW | 55 KW | 75 KW |
Bobbin Size | 315 mm | 400 mm | 500 mm | 630 mm |
Center Payoff Bobbin | 1250 mm | 2000 mm | 2000 mm | 3150 mm |
Take- up Bobbin | 1250 mm | 2000 mm | 2000 mm | 3150 mm |
Maximum Haul-off Linear Speed | 25 m/min | 30 m/min | 34 .7 m/min | 45 m/min |
Central Height | 1000 mm | 1000 mm | 1000 mm | 1100 mm |
5. Photos
6. Packing photo
7. Our factory and introduction
Hejian Baohong Electrical Machinery Co., Ltd. was established in
2006. Our company is located in the Economic Development Zone of
Hejian City, Hebei Province, has been the largest professional
manufacturer for wire stranding machine and laying-up machine in
North China.
Since 2006, relying on the care and support of our customers,
Baohong Machinery has been devoted to the research and development
of wire stranding machine and laying-up machine and has made great
improvement. Now we have become the only one factory who can
develop the production of the JLK rigid stranding machine series to
be an assembly line processing in China, and we also have
independently developed the JGB Bow skip stranding lines, the CGB
Bow skip type cabling lines and the CLY High speed Cradle type
Laying-up lines.
Now, Hejian Baohong Electrical Machinery Co., Ltd., covers an area
of 10000 square meters, production workshop 8000 square meters. Our
company has 60 employees, including 10 R & D staffs. Annual output
value is over 10 million dollars at present,and has developed into
one of the most important Stranding Machine Manufacturer in China.
