Rigid Type Stranding Machine with Auto Loading – Cable
Manufacturing Essential
1. Application
It is mainly used for the stranding and compaction of copper and
aluminum sector conductors, the stranding, drawing and compaction
of round and special-shaped conductors, as well as the stranding of
steel-cored aluminum conductors.
2. Main component
2.1 Φ1600 Pay-off stand
2.2 12B,18B strander
2.3 Wire assembly device
2.4 Meter counter
2.5 Ø1600 double initiative capstan
2.6 Ø2500 take-up stand with traverse
2.7 Transmission system
2.8 Electric control system
2.9 Safety protection device (electric safety cover)
2.10 Ground shaft safety cover
2.11 Reel loading spreader
2.12 Pneumatic wrench
3. Features
3.1 The unit is equipped with a human-machine interface (HMI),
where various operating parameters can be displayed and set in real
time, ensuring intuitiveness and convenience.
3.2 Operating parameters such as the actual rotational speed of
each twisting cage and the linear speed of the traction device can
be displayed intuitively.
3.3 The meter wheel is coated with rubber and supplemented with a
pneumatic pressing device, which effectively improves the metering
accuracy. It is networked with the main control cabinet to realize
fixed-length stopping.
3.4 The wire breaking alarming signal is transited by wireless ,
which can get 100% if any wire break.
3.5 Adopt cabinet type touch screen operation desk , which is
convenient for operation and beautiful in form.
3.6 Rectangular square tube is used for the reinforcement of the
main strander to avoid the jitter of the single board.
3.7 The new belt tensioner adopts high wear-resistant friction
belt, which makes the adjustment more convenient and the service
life longer.
3.8 The cables and air circuits inside the machine are hidden in
the square tube of the base to avoid damage and disorder.
3.9 Reinforcement is added to the front support of the main machine
to increase stability. The wire die base is connected to the front
support of the main machine, which has stronger integration and
better mechanical rigidity.
3.10 The front and rear shaft heads of the main machine are made of
integrated steel castings to avoid cracking caused by welding.
3.11 The braking area of the main machine is increased to improve
the braking performance.
3.12 Surface polishing of capstan wheel.
4.Main technical parameters
| Model (Rigid Stranding Machine) | JLK-630/6 | JLK-630/6＋12 | JLK-630/6＋12＋18＋24 |
| Diameter of single wire | Copper | φ1.5-5 mm | φ1.5-5 mm | φ1.5-5 mm |
| Aluminum | φ1.8-5 mm | φ1.8-5 mm | φ1.8-5 mm |
| Maximum stranded conductor OD | φ15 mm | φ25 mm | φ45 mm |
| Stranding Pitch | 6 Bobbin Stranding Cage | 60-500 mm | 60-500 mm | 60-500 mm |
| 12 Bobbin Stranding Cage | | 75-560 mm | 75-560 mm |
| 18 Bobbin Stranding Cage | | | 92-680 mm |
| 24 Bobbin Stranding Cage | | | 108-790 mm |
| Rotating Speed | 6 Bobbin Stranding Cage | 258 r/min | 258 r/min | 258 r/min |
| 12 Bobbin Stranding Cage | | 236 r/min | 236 r/min |
| 18 Bobbin Stranding Cage | | | 202 r/min |
| 24 Bobbin Stranding Cage | | | 176 r/min |
| Capstan | Capstan Wheel Diameter | 1250 mm | 1600 mm | 2000 mm |
| Maximum Haul-off Force | 8 T | 10 T | 15 T |
| Bobbin | PND630 | PND630 | PND630 |
| Center Payoff Bobbin | PND630 | PND630 | PND630 |
| Take-up Bobbin | 1800mm | 2500mm | 2500mm |
| Maximum Haul-off Linear Speed | 35m/min | 40 m/min | 50 m/min |
| Central Height | 1000 mm | 1000 mm | 1000 mm |
5.Photos
6.Packing photo
7.Our factory and introduction
Hebei Baohong Electrical Machinery Co., Ltd. was founded on August
1, 2006. Located in the industrial zone of Shawa Township, Hebei
City,which lies at the triangular center of Beijing, Tianjin and
Shijiazhuang, the company enjoys convenient transportation and
abundant iron and steel resources. Starting with the production of stranding machine series
products, it has undergone 18 years of development.
By fully relying on talentadvantages and technical strength, the
company continuously researches and develops new technologies and
processes, achieving steady growth and gradually evolving into a comprehensive economic entity
with advanced manufacturing technology, strong production capacity,
and sales networks covering the whole country and overseas.
The company covers a factory area of 30,000 square meters, with
more than 100 employees, including 12 mechanical and electrical
engineers,and its processing equipment totals more than 60 million
yuan. Currently, through the introduction of large-scale processing
equipment and the research, development and improvement of processes, the company has
become the only manufacturer in China that produces JLK cage stranding machine series units on an assembly line.
