Full-Automatic Intelligent Coiler JLK-630/1+6+12+18+24 with Separate Motor Drive

1. Application

This machine is mainly used for the production of large-section and large-length steel-core aluminum stranded wire and copper, aluminum and

aluminum alloy conductors without back-twist stranding; it can also be used for the non-back-twist twisting and compacting of round, special-

shaped and sector-shaped conductor cores.

2.Main technical parameters

3.Main features

3.1 The whole machine is driven by the independent motor, and each section of the cage and capstan are driven by a separate permanent magnet

synchronous servo motor. The cage is driven to rotate through a dedicated gearbox, which simplifies the structure compared to traditional ground

shaft linkage driven rigid type strander and makes equipment maintenance more convenient.

3.2 The control of the whole machine adopts Inovance series PLC, and various production process parameters are set through the touch screen.

Each section of the cage and capstan are driven by a Jiangsu Zhima servo motor, and the motor driver is a frequency converter device. To ensure

transmission accuracy, the transmission motor adopts a grating encoder feedback, and the whole machine adopts a bus communication method to

ensure signal transmission accuracy. In actual production, users set the process parameters such as the pitch of each section of the cage and the

speed of the production line on the touch screen according to the required cable specifications. When starting up, the speed of each transmission

part is automatically calculated by PLC to ensure the synchronization of the whole machine and the accuracy of the twisted wire pitch, and to

achieve stepless speed regulation of the whole machine. The electronic control system has advanced technology, convenient operation, and

reliable operation.

3.3 The pulse principle is used to detect wire breakage, which can accurately determine the wire breakage signal of any bobbin in each section of

the cage, ensuring detection accuracy. Through the display on the touch screen, the operator can quickly solve the problem and start the next start

up.

3.4 The machine uses Inovance programmable controller and field bus to unified command and coordinate the working status of all parts of the

machine, and uses a frequency converter to control the starting and operation of the AC motor. Inovance touch screen is used to set and display

various process parameters. The electronic control system is technologically advanced, easy to operate and reliable in operation.

3.5 The mechanical and electrical control of this structure adopts the currently most advanced full-automatic coil loading and unloading process in

China, which greatly improves the work efficiency of coil loading and unloading!

4. Main components

4.1 Φ630 Pay-off stand

4.2 #type wire guiding stand

4.3 6B,12B,18B,24B strander

4.4 Wire assemble die & compacting device

4.5 Horizontal meter counter(Mechanical, Electronic)

4.6 Φ 2000 strong double capstan

4.7 Top-mounted Φ2500 Gantry-type Take-up and Pay-off Stand

4.8 Electric control system

4.9 Safety protection system

4.10 Side-mounted Horizontal Coil Loading System

5.Photos

6. Packing photos

7. Our factory and company introduction

Hebei Baohong Electrical Machinery Co., Ltd. was founded on August 1, 2006. Located in the industrial zone of Shawa Township, Hebei City,

which lies at the triangular center of Beijing, Tianjin and Shijiazhuang, the company enjoys convenient transportation and abundant iron and steel

resources. Starting with the production of stranding machine series products, it has undergone 18 years of development. By fully relying on talent

advantages and technical strength, the company continuously researches and develops new technologies and processes, achieving steady

growth and gradually evolving into a comprehensive economic entity with advanced manufacturing technology, strong production capacity, and

sales networks covering the whole country and overseas.

The company covers a factory area of 30,000 square meters, with more than 100 employees, including 12 mechanical and electrical engineers,

and its processing equipment totals more than 60 million yuan. Currently, through the introduction of large-scale processing equipment and the

research, development and improvement of processes, the company has become the only manufacturer in China that produces JLK cage

stranding machine series units on an assembly line.

Hejian Baohong Electrical Machinery Co., Ltd. was established in 2006. Our company is located in the Economic Development Zone of Hejian City, Hebei Province, has been the largest professional manufacturer for wire stranding machine and laying-up machine in North China.

Since 2006, relying on the care and support of our customers, Baohong Machinery has been devoted to the research and development of wire stranding machine and laying-up machine and has made great improvement. Now we have become the only one factory who can develop the production of the JLK rigid stranding machine series to be an assembly line processing in China, and we also have independently developed the JGB Bow skip stranding lines, the CGB Bow skip type cabling lines and the CLY High speed Cradle type Laying-up lines.

With many years of rich experience accumulated in the service of cable industry, Baohong Machinery is committed to meet the personalized requirements of customers, to provide high quality products, strong technical support and perfect after-sales service to all China and other international and regional customers, such as Malaysia, Vietnam, Iran, India, Tanzania, South Korea, Cambodia, Almeria, Russia, Ukraine, etc. We are becoming the trustworthy partner to our domestic and foreign customers.

Now, our company adheres to and efforts to our business philosophy "Professional Manufacturing, Sincere Service", Baohong Machinery is constantly pioneering and innovating, is committed to be a super first-class cost-effective wire and cable machinery manufacturers at home and abroad.

Contact Us

Tel: +86-317-3616988

Fax: +86-317-3616898

Mob/Whatsapp/WeChat: +86-182-5653-1268

E-mail: bhmachines2006@gmail.com

Address: Baoantun Village, Shawa Industrial Area, Hejian City, Hebei Province, China